BC Speakers Speaker DE60TN User Manual

Specifications  
Throat Diameter (1)  
Nominal Impedance (2)  
Minimum Impedance  
Nominal Power Handling (3)  
Continuous Power Handling (4)  
Sensitivity (1W/1m) (5)  
Frequency Range  
Recommended Crossover (6)  
Voice Coil Diameter  
Winding Material  
36 mm (1.4 in)  
8 ohm  
8.6 ohm  
110 W  
220 W  
107 dB  
0.5 -18 kHz  
1.2 kHz  
75 mm (3 in)  
Aluminium  
0.14 mH  
Titanium  
1.6 T  
Inductance  
Diaphragm Material  
Flux Density  
Mounting and Shipping Info  
Four M6 holes 90° on 102 mm  
(4 in) diameter  
Overall Diameter  
Depth  
Net Weight (1 unit)  
Shipping Weight (2 units)  
Shipping Box (2 units)  
156 mm (6.1 in)  
66 mm (2.6 in)  
4.1 kg (9.0 lb)  
8.8 kg (19.3 lb)  
210x210x190 mm  
(8.3x8.3x7.5 in)  
1
Driver mounted on B&C ME90 horn  
2
Also available in 16 ohms, data upon request  
3
2 hours test made with continuous pink noise signal (6 dB crest factor)  
within the specified range . Power calculated on rated minimum  
impedance.  
4
HF Drivers  
220 W continuous program power capacity  
1.4” horn throat diameter  
Power on Continuous Program is defined as 3 dB greater than the  
Nominal rating.  
DE60TN  
5
6
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.  
12 dB/oct. or higher slope high-pass filter.  
75 mm (3 in) aluminium voice coil  
500 – 18000 Hz response  
107 dB sensitivity  
Shorting copper cap for extended HF response  
 

3M Oxygen Equipment 7187 User Manual
4XEM Gas Grill C86 User Manual
Acer Laptop MS2219 User Manual
ACP EP Memory Camera Accessories CF120X User Manual
ADC Network Card ACE 142S 142V User Manual
ADTRAN Network Card 1100F User Manual
Air King Fan 9898L User Manual
AKG Acoustics Microphone CK55L User Manual
Barco Camera Lens R9840000 User Manual
Barco Projection Television R9001280 User Manual